Toilet water is too small will cause the entire building unsafe

“3-6 liter water-saving toilets are suitable for China Building Structural status quo, 4.5 liters, 4 liters or less flush the toilet, consumers should be used with caution, not knowing that the toilet can not see the dirt, and it will be hiding in the pipes cross tube, if I can not be washed dirt to the Explorer, there will be congestion and pollution. “Long Ceramic headquarters base in Fujian Province held a forum on water-saving sanitary ware, China Building Sanitary Ceramics Association, the Secretary-General, said Miao Bin, 6 liters of water set water-saving toilets is a scientific and rational, even though emerging markets at lower water Water-saving toilets, but the state standards and will not be for change.

Miao Bin, gave a further explanation, rinse the toilet does not mean really clean. The majority of national residential, office building, the floor drain body and water system design is not yet able to match the toilet too little, too little use of flushing toilet water retention caused by dirt phenomenon has appeared, which although can not see the toilet to what, but the whole floor, horizontal discharge pipe body, once the accumulated dirt, will cause harmful substances and bacteria spread along the pipeline, and spread to every household. SARS virus then spread in a Hong Kong housing is formed along the outfall road.

Selection should be based on building water-saving toilets condition of the

Then more than 6 liters of water conservation can not use the toilet in the end? This, said Miao Bin, whether for residential, commercial, office or hotel Hotel , According to the overall design and construction of sewage pipeline approach may be, the choice must be the toilet.

Some experts suggested that ordinary consumers, if your home is more than a decade building, it is better not to pursue the small volume of water, because most of the building’s sewage pipes to use cast iron pipe, the horizontal tube wall may have dirt residue off phenomena such as iron, to ensure the health, water consumption in the election as much as possible about 6 liters flushing power and great products.

New housing in recent years, if the pipeline design more horizontal tube, but also carefully use a small amount of water the toilet, to avoid the phenomenon of horizontal tube does not water the net. Independent dwellings, not as bodies and as more outfall interspersed residential construction, if the pipe is specifically designed to achieve rapid discharge, using a smaller quantity of product will not have much problems.

“Demo” success does not guarantee good to use water-saving toilets

Buy toilet when the water-saving toilets often see demonstrations, when the seemingly strong table tennis, clothing, etc is a small amount of water washed away, consumers often believe that the toilet had enough kick! However, experts suggest that these things would not have residue of course, washed down is inevitable, but the toilet water is not really kick, and Tongbi density level, water flow design, installation methods, and quality is related accessories.

Related posts:

1. Water Saving Toilet Technology
2. Promoting energy saving climate summit to save money water saving sanitary clever election
3. Have An Older Toilet? Try These Water Saving Tips

Basic functioning of a water softener

A water softening unit makes use of an ion exchange process. The water is run in the mineral tank over the water softener’s resin beads. In this way the hard minerals in the water get attached to the resin, which releases sodium into the water. The water is made soft by the replacement of the ions – mainly calcium and magnesium, with sodium or potassium. Some softeners help to remove iron content from water. Industrial water softeners collect the minerals causing hardness inside the conditioning tank, and flush them out into the drain at regular intervals. There are various categories of water softeners available in the market for industrial or commercial purposes. Some of them are steel tank – diaphragm valves softeners, FRP tank diaphragm valves softeners, steel tank top mounted valves softeners, and fiber glass tank top mounted valves softeners. Softeners can be operated either manually, in a semi automatic manner, or in a fully automatic manner. Each category of softener is rated according to the degree of hardness it can remove. An efficient water softener lasts for many years, with very little maintenance required, except filling them with softening salts such as rock salt, evaporated salt, and solar salt occasionally.

Benefits of water softening

Hard water causes minerals such as calcium and magnesium to build up on piping, water heaters, heat exchangers, and boilers. This build up brings with it expensive repairs, higher energy consumption, and clogged boiler tubes and heat exchangers. Water softening helps to remove these negative effects. Some of the places where industrial water softening equipments are used are boiler feed water, manufacturing plants, office complexes, food processing plants, laundries, restaurants, car washes, and hospitals.

Related posts:

1. Water-saving toilet dilemma: Building state should be – toilet, water saving toilet – Building Materials Industry
2. The Different Filter Systems
3. saving water for plants?